I am replacing the Suncast 4 foot tool hanger with one just like it that had pulled away from the wall and split in two. I guess I had a little too much weight on it. It’s too bad that this product is not made of metal. It would be much better if it were. It’s made of heavy plastic. That’s why I gave it 3 stars. Also, if you put more than one tool on each handle holder they tend to slid off. I drilled a two inch screw into the top edge of each handle near the end to stop the slipping off problem. I would not have bought this product again except that it is the perfect size for my garage space. The first one lasted around 10 years, so that’s not too bad. If I can get another 10 years service out of this replacement tool hanger then I’ll be satisfied before I have to replace it again. It’s not the best product out there, but if you don’t put too much weight on it it should last a long time. Also, it is helpful if you can find a large metal washer and put it between the screw you put into the wall and on top of the plastic. This gives it more strength and makes it less likely to pull away from the wall.
Organize-It carries a wide variety of garden tool storage racks so you can clean out your cluttered garage or tool shed. We have both wall mounted racks and free-standing tool organizers so you are sure to find a rack that works for you. The single long handled tool holder pictured to the left is a popular choice among our customers to get rakes, shovels, brooms and more off the floor so you can easily organize them. Use these handy racks to clean up the piles of yard tools you have sitting in the corner of your garage so you can actually find the tool you are looking for. Know that you have an ally in the fight against clutter. We are dedicated to organizing your garage so you have a place for everything and we will not rest until everything is in its place.
The tower rack was pretty sturdy and was easy to assemble minus the fact that the casters fit in the holes at the bottom, but wouldn’t stay. (In the picture they are there because they stay there, but once you move it, they fall out) The casters are meant to just pop right into a predesigned hole. Almost like the holes were too big for the casters. From my understanding, you can place the tools in there one of two ways. One way is straight from the top. Just slide down into place. That’s not really the best method to do it if it’s in a shed due to lack of height. The other way, if I’m not mistaken is to go through the side. Going through the side is a bit difficult. Maybe the tools I have (mainly husky), are too wide in diameter. It was tough to push through the side. It advertises 40 tools, but I think comfortable I could probably fit half of that. (See posted pictures)
I just built a shed and wanted something that could hold my backyard tools together in a more organized fashion. I wanted something that I could easily move around outside the shed with the casters that are on the bottom. In this review, I’ll try to answer some of the questions that have been asked.
A great option for storing and organizing all of your garden tools. This product works indoors and outdoors with a no-slide guarantee. Install is simple and has the ability to hold up to 50 pounds. The best thing about this product is the fact it is compact. A lot of garden organizers today require a lot of space, or be hanged in a specific place. The Berry Ave Broom Holder and Garden Tool Organizer takes care of this problem with it’s genius, small design.
Founded in 1977, Harbor Freight Tools is the leading discount tool retailer in the U.S. selling great quality tools at ridiculously low prices in over 850 stores nationwide and on its website www.harborfreight.com. Harbor Freight Tools stocks over 7,000 items in categories including automotive, air and power tools, shop equipment and hand tools. With a commitment to quality and a lifetime guarantee on all hand tools, Harbor Freight Tools is a favorite of automotive and truck repair shops, government agencies, schools, manufacturers, contractors and tool enthusiasts who want top-quality and great selection and value. The results speak for themselves – with over 40 million customers and thousands of people switching to Harbor Freight Tools every day.
So, knowing the hanger is plastic, it does what it’s supposed to. I bought it when it was on sale for a fraction of the usual price. At the higher price it would have been a “no way”. You get what you pay for. The tool rack and a small cardboard retail pegboard hanger. There are NO instructions of any kind and no fastening devices like screws. Since it was actually designed to be used with Suncast sheds I was hoping it would snap or somehow fit into premade notches formed into the shed but no such luck. Since you have to screw it to the plastic walls of the shed it is no better of a rack than anything you would buy at the hardware store.
Place this detailed trio anywhere in your home to help eliminate clutter. Set of 3 Decorative Guitar Wall Hooks. Hang coats, scarves, keys and more on this Set of 3 Decorative Guitar Wall Hooks. 3W x…
The following is an overview of the ShippingPass Pilot subscription service. You should review the Terms & Conditions for a more detailed description as well as service limitations prior to signing up for ShippingPass.
This 10 tool Screwdriver Gripper is a must have for any tool user. Transport and store your screwdrivers with ease. Securely holds 10 screwdrivers. Our unique gripping teeth secure the shafts of screwdrivers to accommodate a very wide range of sizes. Fits two stubby screwdrivers at bottom. Use on the go, in toolbox drawers, and on pegboard. Available in red.
Ideally you will need 54 inches of horizontal space to mount one bar on top and another bar below so the holding prongs are off center. The hanger does not come with mounting screws so you will need #10 by 2 1/2 in wood screws.
The Suncast RTC1000 Rolling Tool Cart is unique for a few reasons. First of all, it features 4 high-quality casters. This allows for easy transportation of your tools in and outside of your garage. The Suncast RTC1000 Rolling Tool Cart is made in America. Along with this, up to 30 tools are able to be held by the cart at once. The cart is 43 inches by 20 inches by 37 inches overall. Lastly, a steel core adds strength and durability.
Buy Used and Save: Buy a Used Rubbermaid 5A47 30-Tool Corner Tool Rack and save 29% off the $24.99 list price. Buy with confidence as the condition of this item and its timely delivery are guaranteed under the Amazon A-to-z Guarantee. See all Used offers.
Wall hooks are decorative, and can add different looks to any room, but also help add additional storage. Wall hooks are extremely easy to install, offer a variety of style choices to work in any room,…
Olsa Tools Pliers Organizer holds 16 pliers so that you never have to search through a pile of them before you find the right one! It allows for a quick find of “the” pliers you need when you need them!
Command™ Hooks are available in a wide range of designs to match your individual style and decor. Forget about nails, screws and tacks, Command™ Hooks are fast and easy to hang! Using the revolutionar…
Using the revolutionary Command Adhesive, Command Decorative Hooks stick to many surfaces, including paint, wood, tile and more. Reusing them is as easy as applying a Command Refill Strip, so you can …
I won’t fault this product for being 100% plastic because plastic is what Suncast is all about. I bought this hanger for one of their plastic garden sheds that I’ve had for about 8 years and while it is not the most rigid and secure structure I’ve ever seen, on the plus side being plastic it doesn’t rust. Frankly after owning a plastic shed I would not buy something that large made of 100% plastic again in the future.
Magic Broom is a family-owned and -operated, comprehensive chimney care provider located in Waldorf and Lexington Park, Maryland. We are members of the National Chimney Sweep Guild (NCSG) and are certified by the Chimney Safety Institute of America (CSIA), The National Fireplace Institute (NFI), The Institute for Research in Construction (IRC), and the CSIA’s Certified Dryer Exhaust Technician (CDET) division. We are also the only sweep company in Southern Maryland that can boast a staff consisting of two Master Hearth technicians.
I did as another reviewer recommended and mounted this hanger to a 1 X 10 X 6 foot board. This worked well for my garage space. It is strong and looks very neat mounted on the wall. The length of the hanger supports from the wall, allows for more than one tool in each hanger. This has worked well for my garage application. Would recommend it to others
This tool storage caddy looks great in the photos. It held all of my yard tools as described, however; 16 days in it has collapsed und the weight of the tools. This was not a wise purchase. I would not recommend this item. Look for something much more sturdy!
This wall hook rack is designed with 5 This wall hook rack is designed with 5 double hooks made of iron on a rectangular mango wood wall mount offering convenient hanging storage options for homes and offices. Its distressed paint finish brings rustic vibes to interior design themes. The turquoise and natural brown colors of this wall hook …  More + Product Details Close
When you purchase ShippingPass you don’t have to worry about minimum order requirements or shipping distance. No matter how small the order or how far it needs to go, ShippingPass provides unlimited nationwide shipping. If you need to return or exchange an item you can send it back at no cost or take it to your neighborhood store.
This garden tool organizer is rather large with a length of over 8 feet. Highly durable product and manufactured in China. Steel rail can be held on walls and other surfaces. Can hold up to 24 garden tools and is available in the color silver. As long as there is plenty of space, this tool storage system works incredibly. 8 feet is huge, not something you find in the everyday organizer. A lot of people may think that 8 feet is going to take up a lot of space. Well, this is not exactly true. Remember, this is just a rail, not something boxy that has to be in a precise location.
Ernst 1.2 Drawer Divider Clips II – 2nd Generation New and improved! Ernst Drawer Divider II is now easier than ever – ready to help you conquer toolbox clutter. All components have been redesigned and optimized for easier installation and a more secure fit. Clips easily snap on and hold with solid engagement.The Ernst 1.2 Drawer Divider Clips integrate with patented drawer divider systems. Divider clips work with divider rails to create extra compartments within the drawer divider system….
Easy shop project for home or school : build a garden tools shelf to organize your tool shed, garage or basement. Watch how I turn a couple of salvage boards and some screws into a handy storage rack perfect for hanging large/long gardening tools out of the way.
Rubbermaid 30-Tool Corner Tool Rack (FG5A4700MICHR). Corner storage maximizes available space. Longer handle tool storage organizes 30 tools. Plastic construction is sturdy but lightweight and easy to move even when loaded. Easy to assemble without tools. The large, solid base provides stability, so it won’t tip over even with large tools stored in it. Integrated holes in the top let you anchor the storage tower to the wall. Overall dimensions: 32 inches by 18 inches by 20 inches. For nearly 80 years, Rubbermaid has represented innovative, high-quality products that help simplify life. Recognized as a “Brand of the Century” for its impact on the American way of life.
02

I bought this because I have an Arrow steel shed. I thought it would somehow be easier to install than other tool storage solutions available just about anywhere. Rather than connect to any of the supports in the shed, it’s quite literally a matter of drilling holes in the wall and putting in some sheet metal screws. It doesn’t even include the plastic washers you should be using for any hardware on the outside of the shed- you’re on your own there. It works, but a $15 solution at my local hardware store wouldn’t have been any different to install in my Arrow metal shed than this.
The “pegs” are triangles formed into the hanger. They are very slightly tilted upward so your garden tools don’t easily slide off. They also have VERY slight nibs formed into them to serve the same purpose but the nibs are so tiny they really don’t do anything at all.
While you may not hear many of the realm’s mages admit it, magicking a household broom to become a self-propelled sweeping servitor (albeit one which does very little actual cleaning) is far more complicated than it sounds, requiring no fewer than seven cants of binding.
You can hang just about anything on the Crawford CMDH2-6 Multi-Tool Hanger Utility Hook. These multi-purpose wall hooks keep long-handled tools, scooters, and sports equipment in easy reach. The hook hold up to 70-pounds and is equipped with a protective lip (on its front end) so items don’t slip off and fall to the floor. Long-handled tools are stored upside down with spade and broom heads resting solidly between this hook’s 2-bar design. Long-handled tools with perpendicular handgrips fit between the two bars right side up. The unit mounts easily to wall studs and the hook is protected with a soft coating that won’t scratch your valuables. The Crawford CMDH2-6 Multi-Tool Hanger Utility Hook measures 4.5-Inch (H) by 3-Inch (W) by 6.75-Inch (D) and comes in an attractive black finish. Mounting hardware included, the Crawford CMDH2-6 Utility Hook has aligned itself with the quality and strength of the Crawford name. Crawford invests time and research into providing dependable and hardworking products. Committed to innovation, quality and ease of use, Crawford improves safety and quality in and around the house, offering a versatile line of storage and organization products.