I just had one of the most positive auto mechanic experiences I’ve ever had. I’m driving a little Honda coupe in the mid-Hudson Valley (perhaps not the greatest choice of vehicles, especially in the winter), and last night the bumper all but ripped off due to the many potholes and other road hazards around here. I asked around, and several friends recommended I go to Triebel’s to get it looked at. I drove in right as they were opening up this morning, and asked the mechanic to take a look. Everyone I encountered was exceedingly friendly, even though it was 8:30 in the morning. The mechanic told me I could wait inside, and that it would just be a few minutes. Not even 15 minutes later, he comes back in and says he was able to pop it back on, and that it will hold up until I can eventually get a new bumper (which I’ve been needing for a while now anyway). I never felt condescended, like they thought I was an idiot who knew nothing about cars, which is how I normally feel when I go to an auto mechanic. And the best part: he didn’t charge me a dime. I kept persisting, but he wouldn’t take my money. I don’t say this so that people should go in there expecting handouts and free service, but to testify to Triebel’s incredible service. For the remainder of my time in the Hudson Valley, I’ll only be going to Triebel’s for any auto service.
Assembly: The assembly was straight-forward. With the help of a little Black & Decker Lithium powered screwdriver, I was able to make short work of the process. Make sure not to use a high-torque device or you will end up stripping out the wood and be up crap creek without a paddle. A large flat area is required so I just used the kitchen floor. All the holes lined up fine so the entire frame went together without a hitch. A couple of key things to note when installing the thin backing:
Vacuum friendly. This broom closet solves a common storage problem: the unwieldy bulk of a vacuum with an extension wand. These machines can be powerful tools, but they tend to explode over a large surface area when at rest, taking up a lot of storage space. This closet is just under 2 feet wide, but its door contains a handy wire bracket that corrals the vacuum extension wand.
You told us what you wanted and now we’re delivering it. ShippingPass is our new subscription program designed to bring you unlimited 2-day free shipping for one year with no minimum order. Get what you need ― fast!
Is your wardrobe starting to look more like a war zone? This all-in-one closet organizer is here to save the day! Its two storage towers offer convenient space for shoes and sweaters, while a pair of connecting rods—each expanding up to 50—are perfect for hanging suits, shirts, and beyond. Its industrial strength steel wire construction stands 72 tall and is finished in satin bronze. Assembly is required and wall-mounting hardware is included.
*Place order online, by phone, or in store. Spend $75 or more on merchandise (excluding tax, Gift Cards, eGift Cards, POP! Perks, installation and services, and elfa Sliding Doors) in a single transaction and receive free standard shipping to a single address in the contiguous United States. The offer will be automatically applied and cannot be used toward a TCS Closets® or Business Solutions purchase. Due to size and weight restrictions, some items cannot be shipped or may have additional shipping fees that will still apply.
Prepac is a successful North American designer, manufacturer and drop shipper of functional and stylish RTA (Ready-To-Assemble) home furniture. We maintain a ‘Just in Time’ inventory which ensures that stock is always available to ship within 2 business days! Our RTA product categories include Bedroom Furniture, Home Office Furniture,Living Room Furniture, Media Storage, Audio Video Furniture, Entryway Furniture, and Utility Storage.
Put a shelf on top and hang items Put a shelf on top and hang items below or have two shelves – it’s up to you. Perfect for use in the garage workshop tool shed basement and throughout the home. Easy to follow instructions on label. Use in conjunction with another shelf hanger for more storage options.  More + Product Details Close
This tall, slim cabinet has no fixed center shelf, making it ideal for storing brooms and other tall items. An extra 4 inches of depth offers additional storage capacity. This highly-functional cabinet features a classic white finish and also includes two adjustable shelves for holding smaller items.
Announcing the new Stems file format for DJs. A Stem file is an open audio file format that contains a track split into four audio elements: a drums stem, a bassline stem, a harmony stem, and a lead stem for example.
Triebel’s is a general repair shop, servicing all makes and models. We offer four wheel computer alignment and balancing for cars, trucks and motor homes; complete auto and truck repair; cooling system service; air conditioning repairs and machine shop welding. We also fabricate hydraulic hoses and offer spring U-bolts. Triebel’s is an NYS Motor Vehicle Inspection Station and offers 24 hour towing service.
To see if ShippingPass is right for you, try a 30-day free trial. Also, with ShippingPass, there is no need to worry about commitment. If you decide you want to discontinue the service, you can cancel your subscription at any time. No matter what your shipping needs, Walmart’s got you covered. Sign up for ShippingPass so you can shop more, save money and live better.
{dragByHandle:false,dragByBody:false,cssSelector:ql-thumbnail,widgetClass:OverlayWidget,bindings:{bind0:{element:.ql-thumbnail .Quicklook .trigger,type:quicklookselected,fn:function(){$.fnProxy(arguments,\’#headerOverlay\’,OverlayWidget.show,\’OverlayWidget.show\’);}}},effectOnHide:fade,effectOnShowOptions:{},effectOnHideOptions:{},closeOnBackgroundClick:true,effectOnShowSpeed:1200,onScreenPadding:10,allowOffScreenOverlay:false,captureClicks:true,effectOnShow:fade,effectOnHideSpeed:1200}
I had given up all hope on finding an honest mechanic until I met these guys last week.  I’m tired of the salesman approach when it comes to finding out what’s wrong with your car and what it will need.  I read some reviews online prior to bringing my car in and heard they were very honest.  I had to get my car inspected and they found something major that needed fixing.  They gave me an estimate which was over $800 and wound up getting the work done along with a bunch other things for $773.  I made sure to tell them that I really appreciated their honestly and quality work.
With the Ready-to-Assemble All-Season GearCloset, you can organize seasonal clothes and equipment to help maximize needed space in other areas of your home or garage. The extra-deep cabinet has a hanging rod that supports up to 90 lbs, making it ideal for bulky ski jackets, hunting gear, motorcycle gear and more. This heavy-duty steel cabinet with hammered granite finish and silver tread doors is as tough as it looks and, like many Gladiator® products, is backed by a 10-year limited warranty.*…
The 16” Base Cabinet combines the storage of a 20 inch long drawer and the versatility of a door that can be easily mounted to open left or right. The heavy duty drawer has a half-inch thick bottom and metal sides that roll on smooth roller glides, making it perfect for storing heavy duty items like tools. The cabinet includes one adjustable shelf and 1” thick worktop. Customizable, functional and durable, it coordinates perfectly with other pieces in the Elite Collection.
The ISO 26623 spindle interface is an innovative tooling system with maximum precision and particularly widespread in multi-task machines (turn-mill centres). The torque transmission and centring takes place via the polygon-shaped taper with flange surface contact. As a result, a fixed axial positioning and a high degree of torsional rigidity is achieved.
Bring your garage into the 21st century with their newly redesigned, Performance Plus 2.0 Series; they’re first fully mobile, modular garage cabinet series yet! Each cabinet features fully welded, 18 gauge steel frames with fully lockable double-walled doors; that’s 100% stronger than their Performance Series! We’ve included soft-close door hinges, adjustable steel shelving, full extension drawers, integrated top tool trays on your base and tool cabinets and many more premium features….
My kitchen is rather small so I use as a place to store leftover containers, oven mitts, baking dishes hand towels and cat food. This was the only site to have many sizes to pick from. Was easy to assemble too. I added 2 shelves ( could be an option). Received in 4 days.
broom closet cabinetkitchen broom closet cabinetbroom storage cabinetbroom cabinetstorage cabinettall storage cabinetutility cabinetmop and broom storage cabinetfreestanding broom closetfreestanding closet with doors
Heavy duty all welded 14 gauge construction. Doors open at 180 degrees. 3-point locking system with keyed handle and lock rods. There are fully welded piano hinges for increased strength and rigidity of doors. Hanger bar for uniforms, jackets, etc. Box style legs. Adjustable shelves have 300 pounds capacity per shelf, fixed shelf will bear up to 900 pounds. Adjustable shelves can be installed with no tools required. Ample space for broom storage and there’s a durable safety yellow powder…
Sponsored Products are advertisements for products sold by merchants on Amazon.com. When you click on a Sponsored Product ad, you will be taken to an Amazon detail page where you can learn more about the product and purchase it.
In 1901, a small pattern shop known as the Collis Pattern Works was founded in Dubuque, Iowa. This was our beginning. For more than 100 years, we have continuously serviced the machine tool industry with a full line of tool holders. We are the only manufacturer to certify AT3 or better holders. Collis Toolholder Corporation is ISO compliant. This registration supports our Mission Statement to be customer need-driven and devoted to improving productivity in the metal working industry. We design and manufacture each of our tool holders to precision tolerances, maximizing repeatability, accuracy, and durability. Collis Toolholder Corporation will continue to be the leader in our industry and have committed ourselves to a higher level of customer service performance and as always, to be the best. We are the only US manufacturer that carries a full line of tool holders where you can one stop shop for all your needs. Heartfelt thanks to you, our customers, for over 100 years of partnership.
06

Perfect for your bulkier items and power tool storage, the Performance 2.0 Series 77.25 H x 30 W x 18 D Locker Cabinet is fully welded and constructed from heavy-duty, 24-gauge steel frames that are reinforced with fully lockable, double walled doors for added strength and security. It features adjustable steel shelving, a removable closet rod and an integrated cable management solution, which allows you to charge your power tools behind closed doors. Use the customizable racing stripe to…
CNC turning tool holders are designed to hold either negative or positive inserts. Indexable ISO standard turning inserts with no clearance angle are negative inserts, and those with a clearance angle are positive inserts. Negative inserts are inherently stronger and have more cutting edges compared to positive inserts. Positive inserts are better for cutting aluminum, other non-ferrous materials, and low carbon steels. Turning tool holders for negative inserts have a 5 degree tilt to provide clearance that prevents rubbing on the workpiece. Tool holders for positive inserts have a 0 degree tilt, because the clearance angle is built into the insert. This means that positive insert lathe holders require less horsepower and can be used with smaller machines.
{categorySEOTranslationTypes:category|section,category,thumbnail,catalogSEOTranslationTypes:catalog,delimText::,widgetClass:BreadcrumbWidget,showCatalog:false,ensembleSEOTranslationTypes:ensemble,productSEOTranslationTypes:product}
Wall hooks are versatile tools that help hold a myriad of items. They come in handy in homes, offices and cars and you can find them in multiple sizes. Micro hooks hold small items such as jewelry or hair ties, keeping them organized when not in use. Medium and large hooks make excellent solutions for hanging items such as car keys, sweaters or clipboards. They come in a variety of colors including pink, purple, blue and white so you can color-coordinate your organizational plan or add a pop of color to any room. Because they have removable adhesive, you can add a new strip to reuse the hooks over and over for different purposes.
There are several mechanisms by which indexable carbide inserts can be mounted to a lathe tool holder. The screwdown locking style tool holder secures the insert with a countersunk screw through the hole of the insert and threaded into the tool holder pocket. Screwdown locking tool holders are primarily for positive style inserts. The clamp locking style tool holder secures an insert using a clamp that squeezes the insert in the pocket. The clamp is fastened to the tool holder with a machine screw. Clamp locking tool holders are primarily for TPG inserts. The multilock style tool holder is a combination of the screwdown style and clamp locking style. The insert is held in the pocket with both a lock pin screw through its cylindrical hole and a clamp squeezing its face. Multilock tool holders are primarily for negative style inserts. The wedge lock clamping style tool holder secures the insert with a specialized clamp that goes through the hole of the insert. The clamp is fastened to the tool holder with a machine screw. The advantage of the wedge lock clamping style is that it only takes a single action to index the insert, whereas the multilock style requires the loosening of both the lock pin and the clamp. This minimizes downtime. Wedge lock clamping tool holders are primarily for negative style inserts.
For your protection, all orders are screened for security purposes. If your order is selected for review, our Loss Prevention Team may contact you by phone or email. There may be a two business day delay to process your order.
I purchased the broom cabinet online and it was delivered to a Walmart near my home. The cabinet has some weight to it (70+ pounds), so if you are picking it up by yourself you may need some help. It will not fit into a compact car. It was very easy to assemble, which I did by myself within an hour. However, a helping hand to hold the pieces in place would not hurt. I am able to fit a bucket, mop, and broom in the cabinet. I wish it was a little bit bigger, but it serves its purpose for now. I would recommend this cabinet.
Triebel’s Garage is located at 7317 South Broadway in Red Hook, New York. We are open Monday through Friday from 8:00am until 5:30pm and Saturday from 8:00am until 12:00pm. For an appointment or more information please call our office at 845-758-5800.
Microfiber duster features split strands that create a Microfiber duster features split strands that create a positive charge to grab and hold dust and dirt better than traditional dusters. Microfiber construction safely cleans hard surfaces without requiring additional chemicals. Duster accepts a standard threaded handle to conveniently reach hard-to-reach areas. Durable material is hand-washable to provide long-lasting use. …  More + Product Details Close
Lathe tool holders securely hold carbide inserts for a variety of lathe operations such as turning, boring, facing, grooving, threading, and parting. Indexable turning tool holders are fitted with ISO standard turning inserts, while grooving and threading tool holders use either Top Notch, laydown triangle, on-edge triangle, or proprietary grooving inserts.