The dimensions of this tower was 20.5 D x 38 W x 34.4 H and is meant for indoors, but it could be outdoors. The only problem with that is I think the sun (living in Arizona), ends up destroying/weakening the plastic over time. When used inside, the heat won’t melt the plastic but when the sun takes its toll on it, it would weaken the integrity of the structure, which may cause it to break or bend. And last but not least, it doesn’t appear to be able to attach to any walls. If it is top heavy it may come down, but it seems pretty sturdy to me.
I am replacing the Suncast 4 foot tool hanger with one just like it that had pulled away from the wall and split in two. I guess I had a little too much weight on it. It’s too bad that this product is not made of metal. It would be much better if it were. It’s made of heavy plastic. That’s why I gave it 3 stars. Also, if you put more than one tool on each handle holder they tend to slid off. I drilled a two inch screw into the top edge of each handle near the end to stop the slipping off problem. I would not have bought this product again except that it is the perfect size for my garage space. The first one lasted around 10 years, so that’s not too bad. If I can get another 10 years service out of this replacement tool hanger then I’ll be satisfied before I have to replace it again. It’s not the best product out there, but if you don’t put too much weight on it it should last a long time. Also, it is helpful if you can find a large metal washer and put it between the screw you put into the wall and on top of the plastic. This gives it more strength and makes it less likely to pull away from the wall.
Everything I expected. Holds three shovels in one slot, two metal rakes in one, mattock and ax in one and leaf blower and it’s cord on the last one. Exactly what I needed. Quick Install, find a stud and screw in the wall.
Rubbermaid 30-Tool Corner Tool Rack (FG5A4700MICHR). Corner storage maximizes available space. Longer handle tool storage organizes 30 tools. Plastic construction is sturdy but lightweight and easy to move even when loaded. Easy to assemble without tools. The large, solid base provides stability, so it won’t tip over even with large tools stored in it. Integrated holes in the top let you anchor the storage tower to the wall. Overall dimensions: 32 inches by 18 inches by 20 inches. For nearly 80 years, Rubbermaid has represented innovative, high-quality products that help simplify life. Recognized as a “Brand of the Century” for its impact on the American way of life.
I’m very disappointed with this. The reviews cannot be real. Very flimsy and within a couple of days the plastic was bending, the whole thing was leaning and looks like it is going to topple over. Notice I have about 25 items on it but many are light brooms, poles, etc. I would return if still had packaging.
Maximize your storage by organizing pliers upright in toolbox drawers! The premium rubber base on this rack grips tools and the drawer to keep it all in place. Accommodates a wide variety of tools holding a total of 10. Immediate recognition of missing tools. How many can you fit in your drawer?
You can hang just about anything on the Crawford CMDH2-6 Multi-Tool Hanger Utility Hook. These multi-purpose wall hooks keep long-handled tools, scooters, and sports equipment in easy reach. The hook hold up to 70-pounds and is equipped with a protective lip (on its front end) so items don’t slip off and fall to the floor. Long-handled tools are stored upside down with spade and broom heads resting solidly between this hook’s 2-bar design. Long-handled tools with perpendicular handgrips fit between the two bars right side up. The unit mounts easily to wall studs and the hook is protected with a soft coating that won’t scratch your valuables. The Crawford CMDH2-6 Multi-Tool Hanger Utility Hook measures 4.5-Inch (H) by 3-Inch (W) by 6.75-Inch (D) and comes in an attractive black finish. Mounting hardware included, the Crawford CMDH2-6 Utility Hook has aligned itself with the quality and strength of the Crawford name. Crawford invests time and research into providing dependable and hardworking products. Committed to innovation, quality and ease of use, Crawford improves safety and quality in and around the house, offering a versatile line of storage and organization products.
A great option for storing and organizing all of your garden tools. This product works indoors and outdoors with a no-slide guarantee. Install is simple and has the ability to hold up to 50 pounds. The best thing about this product is the fact it is compact. A lot of garden organizers today require a lot of space, or be hanged in a specific place. The Berry Ave Broom Holder and Garden Tool Organizer takes care of this problem with it’s genius, small design.
Orders shipping to the United States have three shipping options: ground (which typically takes 3-5 days), 2-day air, or overnight. Note that these are days in transit are business days, so Saturday and Sunday are not included. We ship by UPS and US Mail.
I used these hangers in my new garden shed. Other reviews had indicated that the screw holes did not line up well with studs and this would also limit how many I could install. What I did was to mount a 2X6 on the wall of my garden shed with lags into the studs then mounted the hangers every 2 feet and then mounted yet another 2X6 1 foot below the other 2X6 and then mounted the hangers so they were between the hangers above. This allowed me to hang all of my garden tools and still have some space left over for more tools. These are high quality hangers and I recommend them but forget mounting direct to studs.
Excellent tool rack. Extremely sturdy and holds LOTS of hanging tools. Am taking a lessor rack down to put elsewhere so that this one can be THE go-to rack. Superb product and well worth the cost of purchase plus a hefty delivery price.
We do not deliver on Sundays, but do sometimes deliver on Saturday depending on the carrier that is delivering your order. The best way to determine the date of delivery is to check the status in My Account .
This product is not as advertised. The plastic is very flimsy and poor quality. The hooks can’t hold heavy tools and objects. Should have gone for the one made out of metal instead of plastic. I don’t expect this to last very long. It’s not worth the price.
Fantastic. This was just what I was looking for. I am not using it for the conventional things you might hang on hooks like these, like power tools, long cords or hoses, or a bicycle. I am actually using this pair of double hooks to affix a didgeridoo to a wall, for a native arts musical instrument display I have in my living room. One of the hooks I drilled into a stud, the other, I used the included drywall caps before screwing in the screws. Both appear to be very stable and rocksolid. Love it, may buy more if I decide to expand my music display.
Finally a place to keep ALL your bits organized and accessible! This universal tray provides massive storage in a compact space and holds a wide range of bits. Unique design holds small bits upright on one side and holds mid to long bits sideway on the other side so everything fits in the drawer. Conquer the cluttered mess in your toolbox with the Bit Boss.• Fits up to 90 bits• Tools are visible and easy to access• Secure fit• Accomodates a wide variety of bit tools• Push button release to…
I did as another reviewer recommended and mounted this hanger to a 1 X 10 X 6 foot board. This worked well for my garage space. It is strong and looks very neat mounted on the wall. The length of the hanger supports from the wall, allows for more than one tool in each hanger. This has worked well for my garage application. Would recommend it to others
01

Organize up to 30 tools in any corner for more floor space, happier garages, and saner storage sheds with this corner tool rack from Rubbermaid. A large base offers plenty of stability for heavier shovels, rakes, and brooms. With no tools required for basic assembly, the rack also hooks easily to walls with any S hook (not included). This garden tool rack organizer is great for storing rakes, brooms, axes, sledge hammers, trowels, pruners, and more, the unit measures 32 by 18 by 20 inches (height by width by depth). Constructed of durable plastic resin, the rack will not rust, dent, rot or peel for years of reliable corner storage.
This tool hanger meets my needs and then some. Very strong and will store most all garden tools. The only exceptions, that I have found, are tools that are straight with no wide implement on the end of the shaft.
There aren’t any useful comments I can say as the product is unstable; in fact, it wouldn’t stand it long enough to place one (1) tool in it. My husband held it while I placed a lightweight broom in one of the spots and the whole device fell over. Again, I said lightweight and was being held by my husband while I inserted the item.
Sponsored Products are advertisements for products sold by merchants on Amazon.com. When you click on a Sponsored Product ad, you will be taken to an Amazon detail page where you can learn more about the product and purchase it.
This hanger can not only hold garden tools but tools in general as well. Up to 60 pounds of tools can be held by the Coolreall Garage Organizer, and multiple friction grips are used to make sure your tools do not slide out of place. This feature is great because your tools are not likely to drop and break. In comparison, some organizers have hooks/hangers than can easily fall out of place.
This garden tool organizer is rather large with a length of over 8 feet. Highly durable product and manufactured in China. Steel rail can be held on walls and other surfaces. Can hold up to 24 garden tools and is available in the color silver. As long as there is plenty of space, this tool storage system works incredibly. 8 feet is huge, not something you find in the everyday organizer. A lot of people may think that 8 feet is going to take up a lot of space. Well, this is not exactly true. Remember, this is just a rail, not something boxy that has to be in a precise location.
Wall Mount Hanging Pot Pan Rack Organizer Storage Hooks Holder Kitchen Cookware USD 13.99. Perfect for hanging food in the kitchen, hanging your clothes in the bathroom and closet, and for other speci…
Also, pleased to mention that I now have a wonderful teammate/partner in cleaning, that excels in business management and organization AND she can dust and shine like a champion! Ms. Bonnie Battle. We will soon be able to have the Magic Broom Cleaning standard of SUPREME, available to many more. Well, after this snow storm and all. <3 So, I think this applies to those who enjoy living in a clean environment just the same. ****** ANNNND!****** Magic Broom is happy to announce that Bonnie Battel has joined forces , again... so.~ We are looking for some more fabulous clients to clean houses of! ~ HAPPY SPRING!~ 🌷🎆🌞🌈🌡️🛶🍕🌻🌿🌱🦄💖🧞‍♀️+ NEW SEBO E3 ON THE WAY! I was so pleased with my tool organizer that I couldn't sleep; so excited that my garage might finally have some order. It is now holding two shovels, a weed eater, several hand saws, an electric trimmer, a bike pump, a rake, and has room to spare. Couldn't ask for anything more. We tried to mount it with a battery powered screwdriver but only got the screws half way in. Fortunately, my brick mason had a heavy duty electric screwdriver and finished the job. I did buy new screws per several reviews. A great find! Browse by categoryTarget Findsclothingshoesaccessoriesbabyhomekitchen & diningfurniturepatio & gardenelectronicsmovies, music & booksvideo gamestoyssports & outdoorsluggageschool & office suppliesbeautypersonal carehealthfood & beveragehousehold essentialspetsparty suppliesclearancetop dealsgift findergift cardsholiday shop This tool storage caddy looks great in the photos. It held all of my yard tools as described, however; 16 days in it has collapsed und the weight of the tools. This was not a wise purchase. I would not recommend this item. Look for something much more sturdy! The Closet-Pro HD 1-5/16 in. Decorative Closet Pole The Closet-Pro HD 1-5/16 in. Decorative Closet Pole End Caps (2-Pack) are a simple and durable solution for the exposed ends of your closet pole. Constructed from solid cast zinc the caps are coated with a oil rubbed bronze finish that complements your closet design. The included hidden set screws ...  More + Product Details Close I originally had a long review here and only gave this two stars, but I bumped it up to three because it does hold a lot of stuff, and even though it's pretty flimsy, I'm pretty happy with it. If you never move this and aren't trying to hold an army of odd fitting tools, then you'd probably give it a higher rating. I definitely have a ton of stuff on it and it's very important for me to be able to move this, so I'll probably have to bolt on 2x4s to stabilize it somehow (which would be pretty difficult because everything is so wonky). The “pegs” are triangles formed into the hanger. They are very slightly tilted upward so your garden tools don’t easily slide off. They also have VERY slight nibs formed into them to serve the same purpose but the nibs are so tiny they really don’t do anything at all. I bought this fo our town home so we could put up the tools we brought over when we moved out of our single family house. This is obviously a lit better than leaving everything in a corner. they come in smaller sections so you can break it up and customize your wall layout. holes match up with standard stud placement. The plastic hooks are kind of weak so I will probably get some metal ones, but they are working just fine. I feel like I need to be delicate taking things off the hooks though, but I haven't had a problem with them yet, and you get quite a few hooks for the price. This rail is high quality and has the ability to hold over 7 pounds of weight on each hook, perfect for the everyday home and or gardening tools. Compact design allows the rail to be placed in just about any location, in or outdoors. While most people are going to store their tools indoors for the long term, storing them outdoors for a little bit is great when you are working outside. Gripper Wrench Organizers help you organize your wrenches, and securely transport wrenches to the job site.These superior organizers provide the ultimate in tool box storage. They accommodate a wide variety of wrenches and allow for immediate recognition of a missing wrench.Our Wrench Organizers are made from soft, flexible material. While holding wrenches secure for transportation, they also allow for easy one-handed engagement and removal of wrenches. Two standard colors – red and black –... The next best thing to owning all the right tools is knowing exactly where to find them when you need them. Wall-mounted tool organizers and wall hooks keep your yard tools and other gear, like bicycles, off the ground and extremely accessible. These tool organizers are great! I was impressed with how well they are made - and didn't take very long to put up in my garage. I was so happy with the two I purchased for myself, that I purchased two more to give to my neighbor as a Christmas gift! Thanks! Kate in FD Your product will be shipped to its final destination to arrive in 2 business days or faster. If your order is placed before the 11 a.m. PST cutoff time, then it will ship that day and arrive 2 business days later. If your order is placed after the 11 a.m. PST cutoff time, we will do our best to process it the same day but may need an extra day. WE KNOW YOU NEED OPTIONS.
Versatility is a must for organizing any socket set. Capitalize on maximum possibilities with the Socket Boss from Ernst! Individual rails can be removed or switched for customization. Add or remove socket clips, label socket sizes with I.D. stickers, trade colors, swap out drive sizes, add ratchet and extension holders; the options are limitless for organizing your own set of sockets. Perfect for storage in the drawer, on the bench, or on the go. This compact set... Thin sheet metal. Inadequate strength hangars will bend after rehanging shovels or broom. No need to buy this product as it has no special tie in mounting with the arrow shed eco system (the instructions ask you to drill holes wherever it suits, then screw it in as you would any other mounting system...wow, really? Scews and no washers? I was expecting maybe hangar brackets that clamped to arrow shed support beams or frame. Not a standard sheet metal screw and vague instructions advising close your eyes and drill. Regular maintenance of your fireplace/stove/insert and chimney system is required to protect your home and family from the dangers of fire, carbon monoxide, and structural failures. At Magic Broom, we work hard to provide thorough, quality, and affordable services so that our clients don’t have to worry about their wallets or their families. Whatever your fuel type, appliance type, or chimney type, we have the experience and expertise to keep your system working safely and efficiently for years to come. To schedule your annual maintenance or to inquire about any of our other services, please contact us at 301-843-1491! [otp_overlay] [redirect url='http://ihinseiri-dx.com/bump' sec='']